Manual straightening presses - straighten efficiently and with repeatable accuracy
Round, spatially-shaped, profiled, cast, soft or with surface hardness: MAE manual straightening presses process an extremely wide range of workpieces.
You can straighten efficiently, delicately and with repeatable accuracy thanks to the C-columns and straightening stroke controller.
Specially trained operators are not required.
Properties
- Pressing forces: 15 - 20,000 kN
- Workpiece lengths: 30 - 14,000 mm
- Partial cross-section: von 3 bis 500 mm
- Unit weights: von 5 Gramm bis 20 Tonnen
- Straightening accuracy: bis 0,01 mm
- Measuring and straightening takes place in a restraint
- PH-RH manual straightening press - the series with maximum forces of 160 kNRI
Do you require relatively low forces for your straightening process? You can rely on the low-cost, pneumatically powered PH-RH manual straightening press:
- Directive forces: maximum of 160 kN
- Workpiece lengths: 30 - 1.250 mm
- Partial cross-section: 3 - 60 mm
- Straightening accuracy: up to 0,01 mm
- Measuring and straightening takes place in a restraint
- Straightening stroke controller: guarantees delicate operation with repeatable accuracy
- Operation: no special training required
- For curve straightening and pressure straightening
To install the machine:
The vertical machine table has a rotating ram plate. The PH-RH is hydro-pneumatically powered. Lifting control and hand lever ensure simple and safe operation.
Do you process different workpieces?
You can convert your straightening process easily with the PH-RH manual straightening press. You straighten
- different shapes - round, spatially-shaped or profiled parts
- different sizes - as the straightening tool is extendable
MAE systems in the PH-RH series are used in the following sectors in particular:
textiles, electric machines, automotive, tools and standard components
- S-RH manual straightening press - the series with vertical press frame
Straighten applications that require more force with the MAE classic: the S-RH. The S-RH stands out through its innovative controller and energy-saving hydraulics. Furthermore, this manual straightening press is characterized by its vertical press frame, enabling you to straighten with precision and repeatable accuracy, even with high forces.
- Directive forces: 400 - 20,000 kN
- Workpiece lengths: 50 - 14.000 mm
- Partial cross-section: 8 - 500 mm
- Positioning accuracy: under 0,01 mm
- Measuring and straightening takes place in a restraint
- Significantly reduced energy consumption
- Minimal maintenance
- No cooling requirement thanks to minimal generation of heat
- Very low noise emissions
- Straightening stroke controller: guarantees delicate operation with repeatable accuracy
- Operation: no special training required
Structure of the S-HR:
Vertical press frame and C-column; patented, speed variable hydraulic drive unit; position controller, comprehensive features
Sie bearbeiten verschiedene Werkstücke?
With the MAE S-RH manual straightening press, you can straighten
- different shapes - round, spatially-shaped or profiled parts
- different sizes - even very long parts as the straightening tool can be extended to almost any length
We simply adjust the installation height and/or press jib length to your corresponding requirements.
MAE systems in the S-HR series are used in the following sectors in particular:
textiles, electric machines, automotive, tools and standard components, oil and gas production, steel industry.
- RI-RH manual straightening press - the series with horizontal press frame
RI-RH: the manual straightening press with horizontal press frame. You can straighten applications that require more force efficiently and precisely.
- Directive forces: 100 - 25.000 kN
- Workpiece lengths: up to 20.000 mm
- Partial cross-section: 40 - 900 mm
- Positioning accuracy: under 0,01 mm
- Measuring and straightening takes place in a restraint
- Straightening stroke controller: guarantees delicate operation with repeatable accuracy
- Operation: no special training required
Structure of the RI-RH:
Horizontal press frame; patented, speed variable hydraulic drive unit; position controller, comprehensive features
Do you process different workpieces?
With the MAE RI-RH manual straightening press, you can straighten
- different shapes - round, spatially-shaped or profiled parts
- different sizes - particularly very long parts as the straightening tool can be extended to almost any length.
We simply adjust the installation height and/or press jib length to your corresponding requirements.
MAE systems in the RI-RH series are used in the following sectors in particular:
tools and standard components, oil and gas production, steel industry.
We're happy to answer your questions: sales@mae-group.com